SuperSteer® Bell Cranks & Bell Crank Arms
Now, you can help eliminate “white knuckle” steering, road wander and rut tracking with SuperSteer® Bell Cranks
Your customer drives more relaxed. SuperSteer® Bell Cranks (P3032) & (SS100) reduce steering wheel free-play and help minimize constant correction. By test, a coach performs “better than new”.
We designed the P-3032 Bell Crank (more info here) to fit motorhomes for the Chevy/Workhorse P30 & P32 chassis. The P3032 also fits the G30HD & G3500HD Chassis.
The SuperSteer® SS100 Bell Crank (more info here) (pictured right) is designed for the Freightliner XC and the Magnum chassis.
Heavy-Duty Engineering
Both the P-3032 and the SS100 offer similar precision engineer-
ing for tighter steering and considerably longer life than OEM parts.
These Bell Cranks feature:
- Chromemoly heat-treated steel shaft.
- Hi-tensile strength casting, spindle & tapered Timken roller
bearings. - Grease-packed & sealed to keep out dirt and water for life.
- You can adjust these bell cranks repeatedly for your customer to return them to like-new performance.
- They’re maintenance-free.
Comparison
● Pictured left - Factory OEM bell
crank. Note the use of sleeve bushing.
● Pictured right - P30-32 Bell
Crank. Note the use of tapered
bearings protect-
ed inside the
sealed unit.
Why SuperSteer® Works So Well
Straight bushings in standard bell cranks can’t be preloaded like a tapered roller bearing. This means a certain amount of clearance always allows play between the bushing and shaft.
The Difference: The SuperSteer® Bell Crank uses tapered roller bearings on a hi-strength steel shaft. It’s installed with a pre-load so it’s much tighter and allows far less wear.
Endurance Tested: A test proved these Bell Cranks 19% tighter than a set of rebuilt bell cranks with simple bushings. The high-quality tapered roller bearings remain tight with no lateral (side-to-side) or vertical movement after testing. The SuperSteer® unit outlasted the OEM unit many times over & has a lifetime warranty.
Other Customers Are Sold On It
After a SuperSteer® installation, one motorhome owner commented his steering was much tighter and more responsive. What’s more, he felt less driver fatigue.
Bud Weisbrod has some choice
thoughts about bell cranks here.
Life-Long Warranty
These SuperSteer® Bell Cranks are warranted as long as your customer owns his coach.
SuperSteer Bell Cranks work. “Hooray, the wandering steering on my Trek 24 has been fixed. First, I put on your SuperSteer® bellcrank support and there was a noticeable improvement. Then I had it aligned using Henderson’s settings (quite different from Chevrolet’s) and I am satisfied.” Robert Hayward, Seattle, WA
With this improved design, your customer drives relaxed while maintaining crisp, precise steering and control in high wind and road ruts. He steers his rig with much less fatigue, and the system requires virtually no more attention.
SuperSteer® Bell Crank Arms
“We leave nothing to chance”
It may seem unimportant to the cus-
tomer, but you & I know this little gadget is a vital part of his steering system. In addition to the Bell Crank, the Bell Crank Arm must be checked to make sure it’s tight and doesn’t allow play.
A worn bell crank arm can contribute to less responsive steering. You probably already know to check this pivotal joint for wear and replacement if needed.
Benefits To Both You &
Your Customer
Your Customer
Your customer gets relaxed driving and confidence in handling with this improved design.
You get a profitable, minimum-time-investment installation - plus a happy customer.
Install time: Freightliner – 1.0 hrs; P32 – .7 hrs plus recommended alignment. Total – 4 hours.
Click here for specs & photos:
- P3032 Bell Crank to fit Chevy/Workhorse P30, P32, G30HD & G3500HD chassis
- SS100 Bell Crank to fit Freightliner chassis
- SS3032-10D - Driver Bell Crank Arm
- SS3032-10P - Passenger Bell Crank Arm
For more information or help with
ordering, phone or E-mail:
ordering, phone or E-mail:
SuperSteer®
Division of Henderson's Line-Up
458 Redwood Highway
Grants Pass, OR 97527
- Phone us at: 541-955-0769
- “800″ Phone: Toll-free - 888-898-3281
- Fax us at: 541-476-3851
- SuperSteer Tech Line: 541-955-0769
- SuperSteer Order Line: Toll-free - 888-898-3281
- Office Hours: (PST) 7 a.m. - 4 p.m. Mon-Fri; Closed Noon
to 1 p.m. If you call after hours, we'll call you back. If you’re driving & unfamiliar with the area, see a map here
E-mail us and tell us what you need at:
Monday - Friday 8 A.M. to 5 P.M.
Closed Noon to 1 P.M.
Share this:
